|
For Our Customers Benifits:-
Scissors sizes can be manufactured according to customer requirements.
We can have any size or design of scissors colored according to customer demands.
The following methods are used for coloring i. e. titanium, pvc, coating, sand/dull finish & polish finish. As for titanium coating (pvd) we can have the following colors on scissors i.e. multi, blue, purple, black & gold.
If customer requires a certain accessories i.e. adjustable le screw, premium screw, tension plate, etc. to have fitted in any scissors of there choice, this can be done accordingly. Further you are informed that in order to have these accessories/design or steel changed according to your.desires, a minimum quantity of 100 pcs. Per size/per design will be acceptable and time period required to manufacture these scissors with changes will be confirmed upon the quantity ordered. Also kindly be informed that when order has been confirmed and manufacturing started, no further changes will be acceptable during this period.
Steel Which We use to Make Scissors:-
We manufacture Scissors in the following three grades of steel
a) AISI - 440C Stainless Steel. Rockwell HRC 58-60
b) AISI - 420 Japanese Stainless Steel. Rockwell HRC 56-58
c) High Carbon Steel, Rockwell HRC 52-54
The customer can order scissors to be manufactured in any of the three grades of steel mentioned.
Product Information:-
Blade shape(s): There are two types of shapes in blades, these are:
1- Convex blades: This blade is shaped and rounded from the outside of the scissors blade up to the edge.
2- Beveled blades: This is a straight plain/flat blade.
Sharpness Edges:
1- Convex Edge: This does not have a visible separate edge. This is a new technique in scissors
edges and has a long lasting sharp cutting effect. This helps for a effortless cutting and for long period of time
2- Razor Edge: This edge is done for scissors with convex shape blade. A separate edge is
crafted at the end of this convex shaped blade.
3- Beveled Edge: This is a regular form of edge which was initially introduced. This has a slight
creaking sound (two blades meet) as this is a nature of metal. Never-the less this is still
considered as a very successful type of blade. This edge has an ability to cut any form of hair and this edge is heavier/thicker than other edges. This is still used by 90-95% of theusers around the globe.
Handles:
1- Off-set handles:
The scissors with this type of handle has two different handle sizes. Where the middle finger fits in the hole, this handle is slightly longer compared to the handle where the thumb is inserted.
2- Simi-Off set handles: This is more-or less similar to the off-set handles. The only difference is that the length size of the handles is slightly less difference in length.
3- Opposing handles: The lengths of both the handle are the same and therefore called opposing.
Screws:
1- Adjustable Set screw: This type of screw does not need a screw driver to adjust. This can be
immediately adjusted according to need of the user. Scissors with adjustable screw are over- all more preferred, for this reason.
2- Premium Screw: This type of screw will only be adjusted with the help of a screw driver.
3- Fixed Screw: This type of screw cannot be adjusted after manufacturing; its use is negligible now.
Finger rests:
1- Detachable finger rest: These finger rest(s) are screwed to the handle and can be removed by un-screwing according to need.
2- Fixed Fingers: These finger rest(s) are in one form with the scissors and are shaped when the first stage of scissors forging is done. These can not be removed or detached. These can only be removed by cutting them off. These forms of finger rest(s) are also called fixed finger rest(s).
Two piece wielded Shears
This scissor is two piece welded by latest technology (Blade made by 440C while the handle is made by 410 stainless steel ).
By this technology the scissor can be save during the re-sharpening and during adjustment as 440C scissors cannot be adjusted due to very hard steel broken during adjustment by hammer.
Due to the flexibility of handle, scissor adjustment is easy and clients like it very much.
TC scissors:
These type of scissors have extra strip made of materials like tungsten carbide, & cobalt, which is welded on the cutting edge. These scissors provide a far longer cutting performance.
INSTRUMENT CARE
Scissors that are properly being taken care of can be enjoyed for a long time. But incorrect use and handling will damage cutting edges. Keeping your shears clean and well maintained will prolong the life of sharp edges and the overall life of your scissors. Follow some important steps for better Scissors care.
Cleaning your Instruments for longer lasting needs
1- wipe your instrument/blade with soft dry cloth
Cleaning Instruments
1- Cleaning by hand is not recommended as this will damage the instrument or blade.
2- To prevent corrosion or injuries of the instruments, we recommend using a soft brush and neutral or non-aggressive detergents.
3- Dry up the instrument after this procedure by using a soft and dry cotton cloth.
SHEAR CARE TIPS
After cutting hair, wipe your shear blade with soft dry cloth to remove moisture and fragments of hair. Put a drop of oil between the blades and a drop of oil every week behind the set screw. Store in a dry place. Avoid dropping shear(s) on contact with hard objects.
Shears Tension Adjustments ( Important note)
In order to adjust the tension of the shear for an effortless cutting, tighten the screw to a point where you can have an easy movement of the scissor blades.
MANUFACTURING PROCESSES
We complete almost all manufacturing processes within our facility which means that No compromise on quality of the instruments in any criteria. Following are some of the processes that are completed within the manufacturing plant.
FORGING
The Company has its own forging section where Forgings for proper instruments/devices are made through Drop Forging Hammers by qualified & skilled workers using Dyes made of the best-quality Steel. The forgings later are put through the process of overall / ring trimming, and acid cleaning / pickling by those well versed in these processes.
MILLING/MACHINING
Our Milling / Machining section have best quality and imported Milling/Grinding Machines which are operated by the well-trained experts for good milling of the Scissors, ratchets, serration teeth, box cutting, and for all other related processes for ensuring exact perfection before filing. For this, top-quality imported cutters are used. The process of filing is carried out again by the trained professionals to ensure high standard of exactitude and precision.
HEAT TREATMENT
We have our own Heat Treatment Department. Where qualified & trained staff are engaged to give treatment to instruments for furtherance of quality.
ELECTRO-POLISHING & GRINDING
The Electro-Polishing and the Grinding Departments are also manned by skilled & trained workmen using the imported chemicals and the grinding wheels to ensure the best-quality finish.
TUNGSTEN CARBIDE
Our T.C Department is installed with the best-quality imported machinery being manned by the exceptionally well-trained experts using the German Technology.
PASSIVATION
Using the top-quality imported chemical in our Passivation Department we passivate and boil test each and every instrument before packing, subjecting every piece to 24-hour treatment, and if need to be re-passivation process so as to eliminate any chances of rusting / Corrosion etc.
SANDBLASTING
For sandblasting our instruments, we use the machines as well as the best quality sandblasting material, which are operated by skilled & well trained operators.
STAMPING/ETCHING
The Stamping / Etching process is carried out by the soundly trained experts to match the world standards
|
